Use your blender for soups, drinks,
pâtés, mayonnaise, breadcrumbs,
biscuit crumbs, chopping nuts and
crushing ice. Use your mill (if
supplied) for milling herbs, nuts,
coffee beans and purées.
IMPORTANT: HOT BLENDING INSTRUCTIONS
To minimise the possibility of scalding when blending hot ingredients keep
hands and other exposed skin away from the lid to prevent possible burns.
The following precautions must be observed:
CAUTION: Blending very hot liquids may result in hot liquid
and steam being forced suddenly past the lid or filler cap
We recommend that hot liquids are allowed to cool before
NEVER exceed 1200ml / 5 cups capacity if processing hot liquids, such as
soups (refer to the markings on the goblet).
ALWAYS commence blending at a low speed and gradually increase the
speed. NEVER blend hot liquids by using the Pulse setting.
Liquids which tend to foam such as milk, should be limited to a maximum
capacity of 1000ml/4 cups.
Take care when handling the blender as the goblet and its contents will be
Take particular care when removing the lid. The lid is designed to be a tight
fit to prevent leakage. If necessary protect your hands with a cloth or oven
gloves when handling.
Ensure the goblet is securely attached to the base and when removing from
the appliance, guide the base and ensure it is removed together with the
Ensure that the lid and filler cap are securely in place before every blending
Always ensure that the vents in the filler cap are clear before every blending
When fitting the lid to the goblet always ensure that the lid and goblet rim
are clean and dry to ensure a good seal and prevent spillage.
Switch off and unplug:
before fitting or removing parts;
when not in use;
Never fit the blade unit to the
power unit without the
blender goblet or mill jar
Always unplug the appliance before
putting your hands or utensils in the
before using your Kenwood
Read these instructions carefully and
retain for future reference.
Remove all packaging and any
Wash the parts: see 'care and
Always take care when handling the
blade assembly and avoid touching
the cutting edge of the blades when
Only operate the blender with the lid
and filler cap in place.
Only use the goblet with the blade
Never let the power unit, cord or
plug get wet.
Never use a damaged appliance.
Get it checked or repaired: see
'service and customer care'.