Download Print this page

Kenwood BLP30 Instructions Manual page 4

Hide thumbs Also See for BLP30:

Advertisement

Only use the appliance for its intended
domestic use. Kenwood will not accept any
liability if the appliance is subject to improper
use, or failure to comply with these
instructions.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the appliance.
Important - UK only
The wires in the cord are coloured
as follows:
Blue = Neutral
Brown = Live.
The appliance must be protected by
a 3A approved (BS1362) fuse.
Note:
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first time
Wash the parts: see 'care and
cleaning'.
key
blender
filler cap
locking lid
goblet
blender sealing ring
blender blade unit
power unit
cord storage
speed + pulse control
multi mill (if supplied)
multi mill jar
multi mill sealing ring
multi mill blade unit
grinding mill (if supplied)
mill lid
grinding mill blade assembly
to use your blender
Use your blender for soups, drinks,
pâtés, mayonnaise, breadcrumbs,
biscuit crumbs, chopping nuts and
crushing ice.
1 Fit the blender sealing ring
the blender blade unit
the seal is located correctly in the
grooved area.
Leaking will occur if the seal
is damaged or incorrectly
fitted.
2 Screw the blade assembly onto the
goblet - ensuring the blade
assembly is fully tightened
to the graphics on the underside of
the blade unit as follows:
- unlocked position
- locked position
3 Put your ingredients into the goblet.
4 Put the filler cap in the lid.
5 Fit the lid to the goblet and turn
clockwise to lock.
4
into
- ensuring
. Refer

Advertisement

loading