Printing The Nozzle Check Pattern - Canon MG3600 series Online Manual

Hide thumbs Also See for MG3600 series:
Table of Contents

Advertisement

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.
Note
• If the remaining ink level is low, the nozzle check pattern will not be printed correctly.
cartridge
whose ink is low.
You need to prepare: a sheet of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Load a sheet of A4 or Letter-sized plain paper in the front tray.
3. Open the output tray extension, open the paper output tray, then extend the paper output
support.
4. Hold down the Stop button until the Alarm lamp flashes once, then release it immediately.
The nozzle check pattern will be printed.
Do not perform any other operations until the machine completes the printing of the nozzle check
pattern.
5.
Examine the nozzle check
pattern.
175
Replace the FINE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pixma mg3620Pixma mg3600 series

Table of Contents