Selecting Arrival Alarm; Selecting Xte Alarm - Magellan GPS 315 User Manual

Selecting Arrival Alarm

The Arrival alarm will notify you when you are within the
WPT NAMES WPT NAMES
ARRIVAL
arrival circle of the destination waypoint.
OFF
OFF
100FT
ON
250FT
While viewing
500FT
Alarm/Msg screen
0.2 MI
0.5 MI
1.0 MI
Figure A. You can
choose from OFF,
The alarm will sound and a pop-up window will appear
100, 250, 500 feet,
when the GPS position is within the arrival circle you have
0.2, 0.5 and 1.0
chosen. The pop-up window will display the arrival circle
miles.
distance as well as any message you have inputted for the
waypoint. The alarm will sound until turned off.
Default setting: OFF

Selecting XTE Alarm

The XTE (Cross Track Error) alarm will notify you when
WPT NAMES WPT NAMES
XTE
you have gone off your set course.
OFF OFF
100FT
ON
250FT
500FT
While viewing
0.2 MI
Alarm/Msg screen
0.5 MI
1.0 MI
Figure B. You can
choose from OFF,
100, 250, 500 feet,
The alarm will sound when the GPS position is off your set
0.2, 0.5 and 1.0
miles.
course by the distance you have chosen. The alarm will
sound until turned off or the condition is corrected.
Default setting: OFF
Selecting Proximity Alarm
The Proximity alarm will sound when you are within the
proximity of any waypoints you have chosen that are not on
the active route.
38
Select
ENTER
ARRIVAL
Select
ENTER
range
Select
ENTER
XTE
Select
ENTER
range
Magellan GPS 315/GPS 320
.
FIG
A
.
FIG
B