Makita 9902 Instruction Manual page 4

Specific Safety Rules
1. Hold tools by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring or its o w n cord. Contact w i t h a
"live" wire will make exposed metal parts of the tool "live" and shock the
operator.
2. Hold
the tool firmly w i t h both hands.
3.
Make sure the belt is not contacting the workpiece before the switch is
4. Keep hands away from rotating parts.
5. Do
not leave the tool running. Operate the tool only when hand-held.
6.
This tool has not been waterproofed, so do n o t use water o n the workpiece
turned on.
surface.
SAVE THESE INSTRUCTIONS.
SYMBOLS
The followings show the
symbols
used for tool.
v
...................................
volts
A
...................................
amperes
Hz ...................................
herts
%
...................................
alternating current
(01
...................................
Class
I1
Construction
m/min
...................................
meter per minute
4