Removing the coin-cell
battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
CAUTION: Removing the coin-cell battery resets the BIOS settings to
default. It is recommended that you note the BIOS settings before
removing the coin-cell battery.
Prerequisites
1
Remove the battery.
2
Remove the
3
Follow the procedure from step 1 to step 3 in "Removing the
4
Remove the
5
Remove the
6
Remove the keyboard.
7
Follow the procedure from step 1 to step 8 in "Removing the
8
Follow the procedure from step 1 to step 8 in "Removing the
board".
Procedure
Using a plastic scribe, gently pry the coin-cell battery out of the battery
socket on the system board.
computer. After working inside your
base
panel.
memory
modules.
wireless
card.
After working inside your
hard
drive".
palm
rest".
system
61