Video Output Settings - Philips DVDR5520H User Manual

Video Output settings

TV shape
Active video output
Video format
Downloaded From Disc-Player.com Philips Manuals
System Menu Options
(underlined options are the factory default settings)
The picture shape can be adjusted to fi t your TV.
{ 4:3 Letterbox } –For a 'wide-screen' display with
black bars on the top and bottom.
{ 4:3 Panscan } – For a full-height picture with the
sides trimmed.
{ 16:9 Widescreen } – For wide-screen TV
(frame ratio 16:9).
Select the type of video output that matches the video
connection between this recorder and your TV.
{ SCART (RGB) } – For SCART connection.
{ Comp. Video (YUV) } – For Component video connection.
To enable progressive scan feature, go to
{ Video format } setting.
{ HDMI output } – For HDMI connection.
Note: Video output setting is not required for S-Video or
Composite (CVBS) video connection.
This feature is only applicable to Component video connection.
You can choose between progressive and interlaced video
format, check your TV for compatibility.
{ Progressive } – Turn on progressive scan mode. Select this
if your TV is progressive-scan compatible.
{ Interlaced } – For TV that is not compatible with
progressive-scan video.
If you choose a setting that is incompatible with your TV,
Note:
you may not be able to see any picture at all. In this case, wait
for 15 seconds for auto recovery or turn off the progressive
scan as below:
1) Disconnect this unit's ~MAINS from the power supply.
2) Hold down . on this unit whilst reconnecting its
~MAINS to the power supply.
(continued)
89