Setting Operation - Epsolar LS0512 Instruction Manual

Setting Operation

4.3
 Load Work Mode Setting
When the controller is powered on, press the setting button to control
the load output. Press the button once, the ON/OFF status will be
changed corresponding.
 Battery Type Setting
Press the setting button for more than 5 seconds, battery indicator
LED1, LED2, LED3 will be flashing correspondingly. Then press the
setting button to choose Sealed, Gel, and Flooded battery type. The
setting is finished till the digital tube stop flashing.
Battery type selection
1
○
○
○
"○"LED indicator on
2 3
× ×
○ ×
○ ○
Battery type
Sealed lead acid battery
Gel battery
Flooded battery
"×"LED indicator off
19
Table4-4