Usb Driver Installation For Macintosh - M-Audio OXYGEN 8 User Manual

click "Next" to continue.
The installer will scan your hard drive (this can take some time) and will then
install the necessary files and perform setup actions on your system.A series of
progress bars will show you how the process is going.
5. A dialog box will appear, stating that the installation has succeeded. Click
"Finish" to complete the driver installation.
6. Plug the Oxygen 8 MIDI interface into your USB port. Be sure to either have
the power supply connected and power switch set to 9V, or if not using
power supply, be sure to set the power switch to USB Power. Upon doing
so, the computer will find and install the necessary drivers.
Windows Me or 98SE Installation is now complete.

USB Driver Installation for Macintosh

If you are using OS 9, you must first install Opcode's OMS. This is available on
the MIDISPORT drivers page of our website, or can be installed from the driver
CD by opening the OMS folder and then double clicking the OMS install icon
that asks for the driver signature.
This release version of the Oxygen 8 driver requires Macintosh operating
10