FAST START QUICK REFERENCE GUIDE
SKIN INJECTION HAZARD
RISK OF EXPLOSION OR FIRE
Read all warnings and safety
instructions in the owner's manual
See manual for grounding
Plug sprayer into outlet.
Unplug sprayer, remove container
and empty contents.
AIRLESS SPRAYERS PRO 6.8, PRO 6.8 PLUS
This is only a quick reference.
Read the entire instruction manual prior to using the product.
Thin material as necessary. Remove
and fill container with material. Use
a filter to strain material if it is old.
Set flow to maximum setting. Set
speed control to desired setting.
See warnings in manual
Fill sprayer with cleaning solution
and operate trigger until solution
comes through nozzle.
Attach pick-up tube to the longer
port of the cylinder housing. Make
sure it is securely fastened.
Adjust spray pattern by turning
Remove parts. Clean and dry
thoroughly according to Step Two
Clean Up instructions. See page 10.
Attach container to sprayer.
Spray surface, keeping sprayer
level and 10" to 12" from surface.
Use a sweeping and overlapping
Lubricate sprayer before storing.