Connecting A Power Source And The Camera To The Printer - Canon SELPHY CP600 User Manual

Connecting a Power Source and the Camera to
the Printer
Connect the camera to the printer using the cable (included with the camera)
and turn the printer's power on.
For more detailed camera connection instructions, refer to your Camera User
Guide or Direct Print User Guide.
Camera's Compact
Power Adapter (sold
separately or included
with the camera)*2
To DIGITAL terminal
51~
Camera*1
i'ru
<~e
IN terminal
~~~
- Interface cable
~II
• •
~~
• • • • • • • • • • • • • • i • • • • • • • • • • • • • • · • • • • •
;50(>
included with To power
the camera outlet
~
6
~ ~
-~~~
~II.~
Compact power adapter
3
To power outlet
15 cm
~~~ ;"""""~o":S~~H
front and back of the
devices and 10 cm
(4 in.) on both sides
or more of open
space
*1
Canon cameras compatible with CP600, and non-Canon cameras compatible with
PictBridge can also be connected.
*2
Please use the camera's compact power adapter or a fully charged battery pack
(or charged batteries).
The numbered steps in the following instructions refer to the numbers in the above
illustration.
Place the printer on a flat area.
• Be sure to leave about 15 cm (6 in.) of clearance around the paper-handling slot
(at the rear) so that paper has sufficient room to jut out from the slot during
printing.
Connect the supplied power cord to the supplied Compact
Power Adapter CA-CP200.
29