How To Take Apart Your Keyboard; Chapter 3. Important Notes; Packing Requirement For Sending The Pcb Assembly By Post; Short Of Spare Parts While Repairing A Keyboard - Genius KYE Systems SlimStar 100 Service Manual

SERVICE GUIDE

2.1.3 How to take apart your Keyboard

Step 1. Take the screwdriver.
Step 2. Turn on the case.
Step 3. Check the cable line have to broken.
Step 4. Check the PCB

Chapter 3. Important Notes

3.1

Packing requirement for Sending the PCB assembly by post

A keyboard mainly includes the following items : Keyboard, and PCB. PCB
assembly is a kind of sophisticated electronic circuit board. Therefore, well
packing will be required when sending them by post.
• Some sophisticated IC components are mounted on the PCB assembly,
hence it is necessary to pack each PCB assembly with a separate static
protecting beg, in order to avoid static electricity.
• Reliable external packing is also very important when sending the PCB
assembly by post, in that it would avoid unnecessarily lost or damage.
3.2

Short of spare parts while repairing a Keyboard

If you are short of spare parts when you have some keyboards waiting to be
repaired, it would be recommended to take the necessary parts from one
keyboard, so that you may have the as many as keyboards be repaired and
sent back to your customer, and left only one or few keyboards waiting for
spare parts sending from KYE.
VERSION 1.0
Page 9 / Total 11 pages