Advertisement
NOTES REGARDING
THE PICKUP (CD SECTION)
(1) Notes for transport and storage
1) The pickup should always be left in its conductive
bag
until immediately
prior to use.
2) The pickup should never be subjected to external
pressure or impact.
Storage in conductive
bag
Drop impact
(2) Re~air notes
' 1)
2)
3)
4)
The pickup incorporates
a strong magnet, and so should
never be brought close to magnetic materials.
The pickup should always be handled correctly and
carefully, taking care to avoid external pressure and
impact. If it is subjected to strong pressure or impact, the
result may be an operational
malfunction
and/or damage
to the printed circuit board,
Each and every pickup is already individually
adjusted to
a high degree of precision, and for that reason the
adjustment
point and installation screws should absolutely
never be touched.
Laser beam may damage the eyes!
Absolutely
never permit laser beams to enter the eyes!
Also NEVER switch ON the power to the laser output part
(lens, etc.) of the pickup if it is damaged.
Pressure
4
x
4
Pressure
*
o
"a
Q-
%0
P
.-
5)
Laser Beam
BP
o
NEVER look directly at
the laser beam, and don't
—-
Iet contact fingers or other
exposed skin.
Cleaning the lens surface
If there is dust on the lens surface, the dust should be
cleaned away by using an air brush (such as used for
camera lens). The lens is held by a delicate spring.
\
/
How to hold the pickup
Iff
\\,
e
Conductive Sheet
6) Never attempt to disassemble
the pickup.
–2-
Advertisement
