Truncate Header/Trailer Character - Lazerlogic LL2424 Programme Manual

Truncate header/trailer character

This setting allows you to truncate a number of
header or trailer for symbology. As a result, the
specific character you select is deleted from
the symbology you want.
1. Scan the "Enter/Exit Programming Mode"
label;
2. Select the "Truncate Header/ Truncate
Trailer" label;
3. Scan two barcode values from the full
ASCII code table (0-9).
4. Scan "Saving setting to confirm" label;
5. Scan the "Enter/Exit Programming Mode"
label to end the configuration.
Truncate Header
41