Range Care; Self-Cleaning Cycle; General Cleaning - Maytag MGT8720DS00 Use & Care Manual

Gas double oven range
Table of Contents

Advertisement

Available languages

Available languages

RANGE CARE
Burn Hazard
Do not touch the oven during the Self-Cleaning cycle.
Keep children away from oven during
Self-Cleaning cycle.
Failure to follow
these instructions can result in burns.
IMPORTANT: The health of some birds is extremely sensitive to the
fumes given off during the Self-Cleaning cycle. Exposure to the
fumes may result in death to certain birds. Always move birds to
another closed and well-ventilated
room.
Self-clean the oven before it becomes heavily soiled. Heavy soil
results in longer cleaning and more smoke.
Keep the kitchen well-ventilated
during the Self-Cleaning cycle to
help get rid of heat, odors and smoke.
Do not block the oven vent(s) during the Self-Cleaning cycle. Air
must be able to move freely. Depending on your model, see "Oven
Vent" or "Oven Vents" section.
Do not clean, rub, damage or move the oven door gasket. The door
gasket is essential for a good seal.
Prepare Oven:
Remove the broiler pan, grid, cookware and bakeware and, on
some models, the temperature probe from the oven.
Remove oven racks to keep them shiny and easy to slide. See
"General Cleaning" section for more information.
Remove any foil from the oven because it may burn or melt,
damaging the oven.
Hand clean inside door edge and the 1W' (3.8 cm) area around
the inside oven cavity frame, being certain not to move or bend
the gasket. This area does not get hot enough during self-
cleaning to remove soil. Do not let water, cleaner, etc., enter
slots on door frame. Use a damp cloth to clean this area.
Wipe out any loose soil to reduce smoke and avoid damage. At
high temperatures, foods react with porcelain. Staining,
etching, pitting or faint white spots can result. This will not
affect cooking performance.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks and
popping sounds.
The Self-Cleaning cycle uses very high temperatures,
burning soil
to a powdery ash.
The oven is preset for a 3 hour clean cycle; however, the time can
be changed. Suggested clean times are 2 hours for light soil and
between 3 hours and 4 hours for average to heavy soil.
Once the oven has completely cooled, remove ash with a damp
cloth. To avoid breaking the glass, do not apply a cool damp cloth
to the inner door glass before it has completely cooled.
The oven light will not work during the Self-Cleaning
cycle.
When "LOCK" shows in the display, the door cannot be opened. To
avoid damage to the door, do not force the door open when
"LOCK" is displayed.
If an oven door is left open, "Door Open? Clean Canceled" will
appear in the display and a signal will beep. Close the oven door
and press SELF CLEAN.
NOTE: Only one oven can use the Self-Clean cycle at a time, and
24 hours must pass before the next Self-Clean cycle can begin.
To
1.
2.
3.
4.
5.
6.
7.
Self-Clean:
Close the oven door.
Press SELF CLEAN.
"PRESS (+) FOR UPPER OVEN" will appear in the upper oven
text area, and "PRESS (-) FOR LOWER OVEN" will appear in
the lower oven text area
Press the Temp/Time "+" or "-" pads to select the desired oven.
"REMOVE RACKS" will scroll in the selected oven text area
followed by "SELECT OPTION." In the other text area, "PRESS
+ or - KEY" will scroll from left to right.
Choose the Standard Clean setting by pressing the Temp/Time
"+" or "-" pads until "STANDARD CLEAN" and "PUSH START"
scroll in the displays.
Press START.
"Select level" appears in the display.
Press the Temp/Time "+" or "-" pads to adjust the clean level.
Press START.
"UNLOCK IN XXX" will scroll in the upper or lower text area
(depending on oven selection). "LOCKING" will scroll until the
door is locked.
After the door is lock, "CLEAN UPPER" or "CLEAN LOWER"
will scroll in the selected oven text area until the clean cycle is
finished.
Prepare Cooktop:
Remove plastic items from the cooktop because they may
melt.
NOTE: The cooktop burners will not function during the self-clean
cycle.
IM PORTANT:
When the self-clean cycle ends:
"CLN COMPLETE" will scroll in the selected oven text area. "OVEN
COOLING" will scroll in the display until the oven temperature falls
below 500°F (260°C).
"UNLOCKING"
will be displayed until the oven door unlocks and
the lock icon turns off.
Oven temperature must be below 400°F (205°C) to program a
clean cycle.
Only 1 oven can be cleaned at a time.
Both oven doors lock when either oven is being cleaned.
16

Advertisement

Table of Contents
loading

Table of Contents