Memory Media Card; Touch Pad - Toshiba #1203 User Manual

Problem
You cannot access a
disc in the optical
disc drive

Memory Media Card

For further information, please refer to
Problem
Memory media card
error occurs
You cannot write to
a memory media
card
You cannot read a
file
Pointing device
If you are using a USB mouse, you should also refer to both the
mouse

Touch Pad

Problem
The Touch Pad does
not work.
User's Manual
Procedure
Make sure the drive's disc tray is securely closed.
Press gently until it clicks into place.
Open the disc tray and make sure the disc is
properly seated. It should lie flat with the label
facing up.
A foreign object in the disc tray could block laser
light from reading the disc. Make sure there is no
obstruction. Remove any foreign object.
Check whether the disc is dirty. If it is, wipe it with
a clean cloth dipped in water or a neutral cleaner.
Procedure
Remove the memory media card from the
computer and then reinsert it in order to ensure it is
firmly connected.
If the problem persists, then you should refer to the
documentation supplied with your memory media
card for further information.
Remove the memory media card from the
computer and check to ensure that it is not write
protected.
Check to ensure the required file is actually on the
memory media card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
section and the documentation supplied with your mouse.
Procedure
Check the Device Select settings.
Click Start -> Control Panel -> Hardware and
Sound -> Mouse.
Operating Basics.
USB
6-9