Manual Stapling (Mj-1101 Only) - Toshiba e-Studio 2500c Operator's Manual

Multifunctional digital color systems
Hide thumbs Also See for e-Studio 2500c:
Table of Contents

Advertisement

3 SETTING OF BASIC COPY MODES

Manual stapling (MJ-1101 only)

The manual stapling function which enables you to use the staple function without making cop-
ies is available in the Finisher (MJ-1101, optional). This function is useful when copies are made
without stapling being set or when you want to staple originals.
A: Stapling position lamps
B: [Stapling position] button
A
1
Press the [Manual-stapling] button.
The shutter in the paper exit area is opened.
2
Press the [Stapling position] button to switch the stapling position.
Stapling positions are the front and the other end.
The stapling position lamp corresponding to the selected stapling position lights in green.
3
Place paper in the lower tray of the finisher.
Jog the paper well and place it with its face down.
Place the paper in front to have it stapled in the front, and in the other end to have it
stapled in the other end.
Check that the manual-stapling lamp lights in green. If not, place the paper again.
126
Selecting Finishing Modes
C: Manual-stapling lamp
D: [Manual-stapling] button
B
C D

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio 3500cE-studio 3510c

Table of Contents