Installation Planning - Valor 1500IN Installation & Owner's Manual

INSTALLATION
Installer—READ THIS FIRST
1. YOU NEED TO KNOW FROM THE
HOMEOWNER:
- The height of the unit and hearth if used;
- The thickness and type of the wall fi nish
around the fi rebox opening;
- What accessories (trim, decorative lighting,
remote control wall switch, etc.) will be
installed with this fi replace;
- The venting confi guration.
2. Unpack the appliance, removing all items packed
inside and around the appliance.
3. Check that you have everything, using the Pack
Content sheet. Also, check that you have:
◊ a fuel bed (logs or glass) (packed separately)
◊ a set of liners (packed separately).
4. Finish the framing.
5. Fit the appliance into framing.
6. Fix the appliance to the framing.
7. Remove the window of the appliance.
8. Install the venting system.
9. Position the restrictor.
10. Connect the electrical wiring for optional electric
accessories if used.
11. Install the optional electric accessories if used.
12. Connect and test the gas supply.
13. Install the liners.
14. Install the middle platform supports.
24

Installation Planning

15. Install the fuel bed.
16. Refi t the window.
17. Install the control wall switch kit.
18. Initialize the remote control system.
19. Verify the operation and adjust aeration settings.
20. Install the remote control handset wall holder.
21. Instruct the homeowner on the operation and
maintenance of the fi replace.
22. Finish the wall around the fi replace.
23. Install the surround trim.
Tools and supplies required
• Packing knife
• Claw hammer
• Screwdriver set
• Metric socket set
• Pliers
• Adjustable Wrench
• Sealant
• Dish soap/water solution
• Gloves
• Eye Protection
• Electrical outlet box, wire, wire clamp
and switch if installing optional electrical
accessories