Arrma Raider Maintenance Manual page 18

Differential Removal and Replacement (cont.)
7
Undo seven screws holding gearbox halves together.
Notice that one screw is longer than the others.
9
Remove four screws holding
differential together with
1.3mm (0.050") hex driver.
Differential Exploded View
Maintenance kits available:
Differential Bearings - 610001
Differential Gear/Idler Gear Set - 310003
Differential Output Shafts - 310008
Differential Gear Maintenance Set - 310009
10
Remove top half of differential case,
turn lower case upside down over a
cloth and allow old silicone oil to drain.
18
8
Remove differential unit from gearbox.
11
Refill differential with silicone oil to
the level shown. Reinstallation is
the reverse the removal process.
WWW.ARRMA-RC.COM