Lifting And Moving The Tv; Setting Up The Tv; Using The Joystick Button; Basic Functions - LG 22MT57D Owner's Manual

Hide thumbs Also See for 22MT57D:
Table of Contents

Advertisement

Lifting and moving the TV

Please note the following advice to prevent the TV from being
scratched or damaged and for safe transportation regardless of its
type and size.
It is recommended to move the TV in the box or packing
y
material that the TV originally came in.
Before moving or lifting the TV, disconnect the power cord and
y
all cables.
When holding the TV, the screen should face away from you to
y
avoid damage.
Hold the top and bottom of the TV frame firmly. Make sure not
y
to hold the transparent part, speaker, or speaker grill area.
When transporting the TV, do not expose the TV to jolts or
y
excessive vibration.
When transporting the TV, keep the TV upright, never turn the
y
TV on its side or tilt towards the left or right.
Do not apply excessive pressure to cause flexing /bending of
y
frame chassis as it may damage screen.
CAUTION
Avoid touching the screen at all times, as this may result in
y
damage to the screen.
When handling the TV, be careful not to damage the
y
protruding joystick button. (Depending on model)
4

Setting up the TV

CAUTION
When attaching the stand to the TV set, place the screen facing
y
down on a cushioned table or flat surface to protect the screen
from scratches.
Do not carry the monitor upside-down by holding the stand
y
body (or stand base) as this may cause it to fall off, resulting in
damage or injury.
NOTE
Remove the stand before installing the TV on a wall mount
y
by performing the stand attachment in reverse. (Only MT57*,
MT77*)
Lift up the latch at the bottom of the stand base and detach
y
the stand base from the TV. (Only MT47*)

Using the joystick button

(Only 22/24/27MT57*, 24MT77*, 22/24/28/29MT47*)
You can simply operate the TV functions, pressing or moving the
joystick button up, down, left or right.
Image shown may differ from your TV.
y
Joystick Button

Basic functions

Power On
Power Off
Volume
Control
Programmes
Control
Remote control
sensor
When the TV is turned off, place
your finger on the joystick button
and press it once and release it.
When the TV is turned on, place
your finger on the joystick button
and press it once for a few seconds
and release it. (However, if the
Menu button is on the screen,
pressing and holding the joystick
button will let you exit the Menu.)
If you place your finger over the
joystick button and move it left or
right, you can adjust the volume
level you want.
If you place your finger over the
joystick button and move it up or
down, you can scrolls through the
saved programmes you want.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents