Removing The Microprocessor Module - Dell Inspiron 8100 Manual

1. Follow the instructions in "Preparing to Work Inside the
2. Remove the keyboard assembly.
3. Remove the hinge cover.
NOTICE: To ensure maximum cooling for the microprocessor, do not touch the heat transfer areas on the thermal cooling assembly. The oils in your skin
reduce the heat transfer capability of the thermal pads.
4. Insert a pry stick into the latch mechanism at the left side of the microprocessor retaining clip and pry open the clip.
5. Lift out the thermal cooling assembly.
Microprocessor Module
NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface on the computer.

Removing the Microprocessor Module

1. Follow the instructions in "Preparing to Work Inside the
2. Remove the keyboard assembly.
3. Remove the hinge cover.
NOTICE: To ensure maximum cooling for the microprocessor, do not touch the heat transfer areas on the thermal cooling assembly. The oils in your skin
reduce the heat transfer capability of the thermal pads.
4. Remove the microprocessor thermal cooling
NOTICE: When removing the microprocessor module, pull the module straight up. Do not bend the pins.
5. Remove the microprocessor module.
Computer."
Computer."
assembly.