Removing The Keyboard Assembly - Dell Inspiron 8100 Manual

NOTICE: If a wireless network adapter card contains two mini-coax antenna connectors, connect the mini-coax cable to the outermost antenna
connector as shown.
NOTICE: If you are installing a wireless network adapter, fold and tuck the unused wiring harness into the slot so that it does not interfere with the
cover.
3. Pivot the Mini PCI card assembly down until it clicks into place.
4. Replace the Mini PCI card assembly cover.
Keyboard Assembly
NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface on the computer.

Removing the Keyboard Assembly

1. Follow the instructions in "Preparing to Work Inside the
2. Turn the computer over and remove the four screws labeled with a "circle K."
Computer."