Step 9: Install The Transformer - RCA ANT3036W User Manual

Step 8: Attach the mast clamp insert
U-bolt
Mast clamp insert

Step 9: Install the transformer

Transformer
lead
Transformer
Step 10: Insert end caps
Find the U-bolt and mast clamp insert (see
the illustration to the left). Put the U-bolt
into the mast clamp insert with the teeth of
the mast clamp insert facing the closed end
of the U-bolt.
Mast
Insert the U-bolt into the mast clamp on
clamp
the mast clamp and the teeth on the insert
should be facing the same direction.
hardware bag.
Post
booms. These elements have posts at their
bases.
Place two washers on each post. Then position
the transformer leads between the two washers
as shown here.
Insert the plastic end caps in the ends of the
booms as shown here. Use a rubber mallet to
secure them.