Sanyo ICR-S240RM Instruction Manual page 37

Designating the playback order (Playlist)
It is possible to designate the playback order of music.
Create a playlist on your PC and transfer it to the unit to play your music in that
order.
It is also possible to transfer two or more playlists to the unit.
1. Create a playlist like the one shown using a text application (like the
Notepad) on your PC.
Make the name of the playlist "XXX(file name).m3u".
2. Using Explorer, transfer the file to the MUSIC_IC folder on the unit.
3. Disconnect the unit from your PC and start playback on the unit.
The music in the MUSIC_IC folder will be played.
- Enter the drive and file name in the Playlist. Use only alphabets and
numbers characters. (Files names must be 200 characters or shorter.)
- The order of the voice data cannot be changed.
- This unit is compatible with m3u files.
- Some file formats cannot be designated for playback order.
To select the playlist:
1. Before starting playback, press the FOLDER/RPT button to select the
MUSIC (M) folder.
2. Move the Jog switch up or down to select the desired playlist. Then press
the Jog switch.
3. Press the Jog switch again to start playback with the playlist. "P" appears
on the display.
- In the stop mode, press the FOLDER/RPT button to cancel the playlist
playback.
[ENGLISH]
GB-36