Installing the USB driver
If you are using Windows 98/98SE, you need to install the USB driver.
There is no need to install the USB driver, if you are using Windows XP/
Reproduction of this driver is forbidden.
This driver shall not be copied and reprinted.
SANYO shall not be liable for any damages arising out of the use of this
1. Turn on your PC and Windows is started. Do not connect the unit to the PC
2. Load the USB driver CD-ROM
(supplied) in the CD-ROM drive of the
PC. [Stereo Digital Voice Recorder
Setup] screen appears automatically.
If the screen is not displayed, right-
click [Start], select [Explore].
Double click "Setup.exe" file in the CD-
ROM. [Stereo Digital Voice Recorder
Setup] screen appears.
3. Click [USB Driver]. [InstallShield Wizard] screen appears.