Table of Contents
Advertisement
Available languages
Available languages
Maintenance
Your Black & Decker corded/cordless
appliance/tool has been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular
cleaning.
Warning! Before performing any maintenance
on corded/cordless power tools:
•
Switch off and unplug the appliance/tool.
•
Or switch off and remove the battery from the
appliance/tool if the appliance/tool has a
separate battery pack.
•
Or run the battery down completely if it is
integral and then switch off.
•
Unplug the charger before cleaning it. Your
charger does not require any maintenance
apart from regular cleaning.
•
Regularly clean the ventilation slots in your
appliance/tool/charger using a soft brush or
dry cloth.
•
Regularly clean the motor housing using a
damp cloth. Do not use any abrasive or
solvent-based cleaner.
•
Regularly open the chuck and tap it to
remove any dust from the interior (when
fitted).
Mains Plug Replacement
If a new mains plug needs to be fitted:
•
Safely dispose of the old plug.
•
Connect the brown lead to the live terminal of
the new plug.
•
Connect the blue lead to the neutral terminal.
•
If the product is class l (earthed), connect the
green / yellow lead to the earth terminal.
Warning! If your product is class ll double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs.
Any replacement fuse must be of the same
rating as the original fuse supplied with the
product.
Technical Data
Input voltage
Power input
No-load speed
Disc diameter
Disc bore
Max disc thickness
Grinding discs
Cutting discs
Spindle size
Weight
ENGLISH
KG750 KG751
(Type 1) (Type 1)
Vac 220-240 220-240
W
750
750
-1
min
11,000
11,000
mm
115
125
mm
22
22
mm
6
6
mm
3.5
3.5
M14
M14
kg
2.24
2.34
13
Advertisement
Table of Contents
