Charging The Battery - Panasonic HC-V130 Basic Operating Instructions Manual

Charging the battery

When this unit is purchased, the battery is not charged. Charge the battery fully before
using this unit for the first time.
∫ Charging with an AC adaptor.
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always
"live" as long as the AC adaptor is connected to an electrical outlet.
Important:
≥ The AC adaptor and USB cable are for use with this unit only. Do not use them with other
equipment. Similarly, do not use AC adaptors and USB cables from other equipment with
this unit.
≥ The battery cannot be charged when the power is on. Press the power button to turn off
the power. (l 14)
≥ It is recommended to charge the battery in a temperature between 10 oC and 30 oC. (The
battery temperature should also be the same.)


A USB terminal
B To the AC outlet
≥ Insert the plugs as far as they will go.
∫ Connecting to the AC outlet
If you turn on the unit while connecting with the AC adaptor, you can use the unit with power
supplied from the outlet.
When recording for a long time, keep the AC adaptor connected and use it together with the battery.
This allows you to continue the recording even if a power failure occurs or the AC adaptor is
unplugged from the AC outlet by accident.
10
SQT0040

 



1
Open the LCD monitor.
2
Connect the USB cable to the AC
adaptor.
≥ Check that the plug portion of the AC
adaptor is not loose or misaligned.
3
Plug the AC adaptor into the AC
outlet.
4
Connect the USB cable to the
unit.
≥ The status indicator C will flash red with
approx. 2 seconds period (off for approx. 1
second, on for approx. 1 second), indicating
that charging has begun.
It will turn off when the charging is
completed.