Table of Contents
Advertisement
ENGLISH
AFTER SALES SERVICE FOR THE BLACK & DECKER
PRODUCT (UK, AUSTRALIA AND NEW ZEALAND ONLY)
Black & Decker offers a nationwide network of
authorised service agents. The use of other than
genuine Black & Decker accessories and parts may
damage or reduce the performance of your
Black & Decker product and may also endanger the
user. The terms and conditions of the warranty may
also be effected.
THE AFTER SALES SERVICE POLICY
(UK, AUSTRALIA AND NEW ZEALAND ONLY)
It is our aim that all Black & Decker customers should
be totally satisfied with their Black & Decker product
and after sales service, but if help or advice is needed
please contact a local Black & Decker authorised
repair agent manager who will be happy to help. Full
details of our unique after sales service can be
obtained from any of our Black & Decker authorised
repair agents.
ACCESSORIES
The performance of any power tool is dependant upon
the accessory used. Black & Decker accessories are
engineered to high quality standards and are designed
to enhance the performance of your tool. Buying a
Black & Decker accessory will ensure that you get the
very best from your Black & Decker tool.
TECHNICAL DATA
The level of sound pressure of the tool is in
accordance with EEC legislation. It is recommended
that you take appropriate measures for the protection
of your hearing if the sound level seems
uncomfortable. This normally equates to a sound
pressure in excess of 85dB (A).
FEATURES
1.
Trigger switch
2.
Lock-on button
3.
Variable speed wheel
4.
Dust shroud
5.
Blade support roller
6.
Shoe plate
7.
Dust extraction
8.
Variable dust blowing control
9.
Scroller knob
10. Scroller lock button
Your jigsaw includes some or all of these features.
Note: This user manual also covers catalogue numbers
with a letter suffix. Refer to your carton for details of
your product.
6
•
9
•
3
10
•
2
•
1
•
4
•
7
•
•
8
5
•
•
6
3
•
2
•
•
1
4
•
7
•
•
8
5
•
•
6
FITTING THE BLADE
Manual blade change models (only use these blade
types
)
Disconnect your jigsaw from the power supply.
Slacken the two screws
and ensuring blade teeth
are facing forward, push
blade shank as far as
possible into the sawblade
holder. Slightly tighten
screws alternately to
position the blade, then fully tighten screws. To
release, turn both screws one turn anti-clockwise.
Superlok blade change models (only use this blade
type
)
Disconnect your jigsaw from the power supply.
Lift the lever. Ensuring the
blade teeth are facing
forward and the blade is
positioned towards the back
of the blade holder insert
the blade shank as far as
possible into the saw blade
holder. Release lever and the blade will be clamped
securely in place. To release the blade, lift the lever.
Hide quick links:
Advertisement
Table of Contents
