Maintenance; Protecting The Environment - Black & Decker BDBB26 User Manual

The red battery status LED (3) will
illuminate to show that the product is
charging (do not charge for more than
10 hours).
Use
Using the hook (fig. B)
The hook (1) may be used to store or
suspend the light bar. The hook rotates
so that the light bar (1) can be set to any
position. Make sure that the hook is
secure around the supporting object.
Operating the light bar (fig. C)
To illuminate half of the LED's move
the on/off/brightness switch (4) to the
position.
To illuminate all of the LED's move the
on/off/brightness switch (4) to the
position.
To turn the unit off, move the on/off/
brightness switch (4) to the OFF
position.

Maintenance

Your Black & Decker tool has been
designed to operate over a long period of
time with a minimum of maintenance.
Continuous satisfactory operation
depends upon proper tool care and
regular cleaning.
Warning! Before performing any
maintenance or cleaning of the tool, unplug
the unit from the power supply.
From time to time wipe the tool with a
damp cloth. Do not use any abrasive or
solvent-based cleaner. Do not immerse
the tool in water.

Protecting the environment

Separate collection. This
product must not be disposed
of with normal household
waste.
Should you find one day that your
appliance needs replacement, or if it is of
no further use to you, think of the
protection of the environment. Black &
Decker repair agents will accept old Black
& Decker tools and ensure that they are
disposed of in an environmentally safe
way.
Separate collection of used
products and packaging allows
materials to be recycled and
used again. Re-use of recycled
materials helps prevent
environmental pollution and
reduces the demand for raw
materials.
Local regulations may provide for
separate collection of electrical products
from the household, at municipal waste
sites or by the retailer when you purchase
a new product.
Black & Decker provides a facility for the
collection and recycling of Black & Decker
products once they have reached the end
of their working life. To take advantage of
this service please return your product to
any authorised repair agent who will
collect them on our behalf.
You can check the location of your
nearest authorised repair agent by
contacting your local Black & Decker
office at the address indicated in this
manual. Alternatively, a list of authorised
Black & Decker repair agents and full
details of our after-sales service and
contacts are available on the Internet at:
www.2helpU.com.
5