1. Manuals
  2. Brands
  3. Harman Kardon Manuals
  4. Amplifier
  5. DPR 2005
  6. Owner's manual

Harman Kardon DPR 2005 Owner's Manual

Digital path receiver
Hide thumbs Also See for DPR 2005:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
DPR 2005 Digital Path Receiver
OWNER'S MANUAL
Power for the Digital Revolution
®

Advertisement

Table of Contents
loading

Related Manuals for Harman Kardon DPR 2005

Summary of Contents for Harman Kardon DPR 2005

  • Page 1 DPR 2005 Digital Path Receiver OWNER’S MANUAL Power for the Digital Revolution ®...

  • Page 2: Table Of Contents

    Table of Contents Introduction Preset Tuning Changing Devices Safety Information RDS Operation Macro Programming Unpacking RDS Tuning Punch-Through Configuration Front Panel Controls RDS Display Options EzSet Configuration Rear Panel Connections Program Search Renaming Main Remote Control Functions Programming the Remote Resetting the Remote Zone II Remote Control Functions Preprogrammed Code Entry...

  • Page 3: Introduction

    With the purchase of a Harman Kardon Dolby Headphone circuitry creates an amazing ferent one (Audio only) in a second room. DPR 2005 you are about to begin many years of sense of openness with headphones. Two-chan- Complete control over volume is possible with a listening enjoyment.

  • Page 4: Safety Information

    Verify Line Voltage Before Use the 6/8-channel direct inputs for use I Make certain that proper space is provided Your DPR 2005 has been designed for use with with DVD-Audio or SACD players, both above and below the unit for ventilation.

  • Page 5: Front Panel Controls

    Front Panel Controls Main Power Switch Set Button Ò Surround Mode Indicators Ú System Power Control Preset Station Selector Speaker/Channel Input Indicators Power Indicator Button Û Digital Select Button ⁄ Ù Headphone Jack Input Source Selector Channel Select Button ı Surround Mode Group Selector RDS Selector Volume Control...
  • Page 6 Front Panel Controls 9 Surround Mode Selector: Press this ^ RDS Select Button: Press this button to dis- Ú Speaker/Channel Input Indicators: These button to cycle through the individual surround play the various messages that are part of the RDS indicators are multipurpose, indicating either the modes available after the Surround Mode data system of the DPR’s tuner.

  • Page 7: Rear Panel Connections

    Rear Panel Connections AC OUTLETS ~230V/50Hz UNSWITCHED / 100W MAX SWITCHED / 50W MAX e S R T P Q C B f Y W X a Z 5 7 6 3 2 AM Antenna Center Speaker Outputs Video 3 Video Inputs FM Antenna Surround Speaker Outputs Video 2 Video Inputs...
  • Page 8 Z Video 1 Audio Inputs: Connect these jacks remote controlled devices. Connect this jack to to the PLAY/OUT audio jacks on a VCR or other the “IR IN” jack on Harman Kardon or other audio or video source. compatible equipment.
  • Page 9 Preamp Outputs: Connect these jacks to d RS-232 Port: This jack may be used to con- an optional, external power amplifier for appli- trol the DPR 2005 over a bi-directional RS-232 cations where higher power is desired. serial control link to a compatible computer or programmable remote control system.

  • Page 10: Main Remote Control Functions

    Main Remote Control Functions Power Off Button IR Transmitter Window LCD Information Display Power On Button Input Selectors AVR Selector AM/FM Tuner Select 6-Channel/8-Channel Direct Input Test Button Sleep Button Surround Mode Selector Night Mode Channel Select Button Dim Button Navigation Button Set Button Digital Select...
  • Page 11 DPR is still turned on. The to the 6-Channel Direct Inputs or the ate the DPR and most Harman Kardon CD or DVD blue accent lighting inside the volume control 8-Channel Direct Inputs 9 (the input players and cassette decks.
  • Page 12 Main Remote Control Functions K Tuning Up/Down: When the tuner is in use, S Stereo Mode Selector: Press this button Z Delay Select Button: This button selects these buttons will tune up or down through the to select a stereo playback mode. When the but- adjustments to the A/V Sync Delay and the indi- selected frequency band.
  • Page 13 EzSet function to quickly and accurately cali- the tone mode settings, enabling adjustment of brate the DPR 2005’s output levels. When the the bass and treble boost/cut. You may also use button is pressed you will then need to select...

  • Page 14: Zone Ii Remote Control Functions

    å Power Off: When used in the room where ˙ Disc Skip: Press this button to change TAPE the DPR is located, press this button to place the discs on compatible Harman Kardon CD or DVD unit in Standby. When it is used in a remote TUNING changers.

  • Page 15: Installation And Connections

    Installation and Connections After unpacking the unit, and placing it on a solid 7. Connect the front, center and surround 8. Connections to a subwoofer are normally speaker outputs DEFc to the respective surface capable of supporting its weight, you will made via a line level audio connection from the Subwoofer Output 4 to the line-level input need to make the connections to your audio and...

  • Page 16: Scart A/V Connections

    If the adapter plugs are not labeled in For the connections described above your video video inputs on the DPR 2005, the factory default that way, pay attention to the signal flow direc- device needs RCA (cinch) connectors or/and S-...
  • Page 17 Installation and Connections Important Note for the Use of Black Black SCART-Cinch Adapters: Figure 1: Yellow Yellow When video sources are connected to the TV SCART/Cinch-Adapter for directly with a SCART cable, specific control playback; signals apart from Audio/Video signals will be signal flow: SCART ¡...

  • Page 18: System And Power Connections

    RJ-45 jack in compliance with the distance from the DPR to the remote room, three instructions furnished with the A-BUS module. The DPR 2005 is designed for flexible use with options are available for audio connection: No further installation or adjustment is needed,...

  • Page 19: Speaker Selection

    Installation and Connections The DPR features a removable power cord that Depending on the specifics of your room Center Front Speaker allows wires to be run to a complex installation acoustics and the type of speakers in use, you so that the unit, itself, need not be installed until may find that imaging is improved by moving the No more than 60cm...

  • Page 20: System Configuration

    To maintian the unit's safety rating, static image such as these menus or video game DO NOT substitute the power cord for one with The DPR 2005 features an advanced memory sys- images may cause the image to be permanently lower current capacity.
  • Page 21 The DPR 2005’s Auto Polling feature select a different speaker configuration for each name is entered, up to a maximum of fourteen...

  • Page 22: Audio Setup

    System Configuration indicating that the analog Video 5 jacks Ô are In cases where the speakers in a system have A U D I O S E T U P now record outputs. different impedance ratings, such as 8 ohms for →...

  • Page 23: Speaker Setup

    System Configuration At last, this menu also makes you chose if the This setting allows you to use the same speaker that uses an external DAC or an optional, external speaker setting will be the same for each input configuration for all inputs, or to have different phono preamp, you must choose the INDE- source (...
  • Page 24 System Configuration Buttons E on the remote to When is selected, with all digital sur- 8. Press the The factory default setting for all speaker positions is SMALL ‹ › round modes low-frequency surround channel select the option that best describes your system. 100Hz.
  • Page 25 System Configuration Since the crossover point commonly used in the 10. When all speaker selections have been made, As an example, in the Figure below, all speakers Button E until the cursor is next creation of the LFE channel is 120Hz, we press the are set for “large, ”...
  • Page 26 Logic 7 mode enables the center channel sound more broadly into the BACK TO MASTER MENU to continue the Harman Kardon’s exclusive Logic 7 processing to left and right channels. A higher number (up to setup process. create fully enveloping, multichannel surround “7”) produces a tighter center channel...

  • Page 27: Surround Setup

    System Configuration On the menu, the selection choices a group. This feature is called A/V Sync Delay; it and then pressing the Set STEREO MASTER MENU Buttons E on the remote Button F. However, if you have a digital video made with the allows you to compensate for delays to the video ‹...

  • Page 28: Output Level Adjustment

    Figure 7a Using EzSet other than the one shown in the Indicator, the Harman Kardon’s exclusive EzSet remote makes it on-screen display or the front panel display, To adjust the Night mode setting, make certain there is an error in the speaker connections.

  • Page 29: Manual Output Level Adjustment

    System Configuration 3. Press the Set Button F within five seconds Manual Output Level Adjustment After checking for speaker placement, let the test Output levels may also be adjusted manually, noise circulate again, and listen to see which to activate the remote’s manual mode, so that either to set them to a specific level with an SPL channels sound louder than the others.
  • Page 30 System Configuration may be different with each surround mode, or to increase or decrease the level of certain speakers intentionally, depending on the surround mode selected. Note: Output level adjustment is not available for the VMAx or Surround Off mode, as no surround speakers are used (so level differences between the speakers in the room cannot occur).

  • Page 31: Operation

    Logic 7 Cinema Exclusive to Harman Kardon for AV receivers, Logic 7 is an advanced mode that extracts the Delay time not adjustable Logic 7 Music...
  • Page 32 Operation Surround Mode Chart MODE FEATURES DELAY TIME RANGE DTS Neo:6 Cinema These two modes are available when any analog source is playing to create a six-channel Delay time not adjustable DTS Neo:6 Music surround presentation from conventional Matrix-encoded and traditional Stereo sources. Select the Cinema version of Neo:6 when a program with any type of analog Matrix surround encoding is present.

  • Page 33: Basic Operation

    Operation Basic Operation display will dim to one half brightness when the 6-Channel/8-Channel Direct Input Sleep function is programmed. To cancel the Sleep Once you have completed the setup and configu- • There are two input choices available for use function, press and hold the Sleep Button 9 ration of the DPR, it is simple to operate and with sources such as a DVD-Audio or SACD player...

  • Page 34: Surround Mode Selection

    Dolby Pro scroll through the list of available modes. times until the desired setting ( BASS MODE Logic II Music mode or Harman Kardon’s exclu- ) appears in the on-screen TREBLE MODE Note that the Dolby Digital, Dolby Digital EX, DTS sive Logic 7 Music mode for a dramatic improve- display and the Lower Display Line ˜.

  • Page 35: Dolby Digital

    DPR. Contact decoder chip, replacing the monolithic digital PCM (Pulse Code Modulation) is the non- com- your Harman Kardon dealer for additional details. filters used in conventional DACs, will enable pressed digital audio system used for compact...

  • Page 36: Selecting A Digital Source

    Operation Selecting a Digital Source present, the DPR uses a variety of indicators to let speaker configuration is set to show the presence To utilize either digital mode you must have you know what type of signal is present. This will of subwoofer.

  • Page 37: Speaker/Channel Indicators

    (Matrix decoded with outputs of the source to the DPR 2005, with the NEO:6, LOGIC 7 or 7 CH Stereo), but no letters digital audio input set as the default following inside will light as the unit will not receive an the steps shown on page 21.

  • Page 38: Tape Recording

    In addition to the rear panel digital outputs, the program material such as a test disc, or a selec- DPR offers Harman Kardon’s exclusive config- tion you are familiar with. Additionally, the out- urable front panel output jack feature. For easy...

  • Page 39: Dim Function

    Operation other adjustments to make, press the OSD Memory Backup Button L to exit the menu system. This product is equipped with a memory backup NOTE: The output levels may be separately system that preserves tuner presets and system trimmed for each digital and analog surround mode. configuration information if the unit is turned off If you wish to have different trim levels for a specific completely, accidentally unplugged or subjected...

  • Page 40: Advanced Features

    Advanced Features The DPR is equipped with a number of advanced Front-Panel-Display Fade brightness of the display, or turn it off completely. features that add extra flexibility to the unit’s To change the display brightness setting for a In normal operation, the front-panel displays and operation.

  • Page 41: Turn-On Volume Level

    Advanced Features Turn On Volume Level Semi-OSD Settings Full-OSD Time Out Adjustment menu system is used to As is the case with most audio/video receivers, The semi-OSD system places one line messages FULL OSD simplify the setup and adjustment of the DPR when the DPR is turned on, it will always return at the lower third of the video display screen using a series of on-screen menus.

  • Page 42: Multiroom Operation

    Additional information will also be made avail- is capable of sending one source to a second able through the Harman Kardon Web Site at remote zone, as long as the Dolby Pro Logic IIx zone in the house while separate source is lis- www.harmankardon.com.

  • Page 43: Basic Tuner Operation

    DPR, you may use the main remote control MULTI INPUT Set Button F, and then press the or any remote programmed with Harman Kardon ⁄ ¤ To activate the feed to the remote room, press Navigation Button E until the desired input codes.

  • Page 44: Preset Tuning

    Multiroom Operation 4. Stations may also be tuned directly by press- Preset Tuning ing the Direct button J, and then pressing Using the remote, up to 30 stations may be the Numeric Keys H that correspond to the stored in the DPR’s memory for easy recall using station’s frequency.

  • Page 45: Rds Operation

    Tuner Operation RDS Operation Some RDS stations may not include some of • COUNTRY: Country Music these additional features. If the data required The DPR is equipped with RDS (Radio Data • NATIONAL: National Music for the selected mode is not being transmitted, System), which brings a wide range of informa- the Main Information Display ˜...

  • Page 46: Programming The Remote

    (PVR) such as TiVo and Replay are pro- may be programmed into the DPR 2005 remote (Figure 21), if your device has turned off, press grammed by selecting VCR as the device. For...

  • Page 47: Automatic Code Entry

    Programming the Remote Although the DPR remote is preprogrammed corner of the LCD display’s top line to remind 11. When pressing the “1” button does not turn with an extensive library of codes for many major you that the remote is working even though the device being programmed back on, brands, it is also possible that you may have you may not see anything happening to the...

  • Page 48: Changing Devices

    Programming the Remote of the LCD screen, as shown in Figure 26. 8. Continue to hold the button on the original Changing Devices Press the Set Button F to begin the remote until the DPR’s display changes In the factory default settings, the DPR remote is process of learning commands from another again.

  • Page 49: Macro Programming

    Programming the Remote 8. If the device being programmed into the DPR O L D D E V I C E T Y P E M A I N M E N U remote does NOT turn off after you have M A C R O pressed the “1”...

  • Page 50: Punch-Through Configuration

    Programming the Remote 7. The next display (Figure 42) and the subse- appear in the remote’s LCD display. Macros 2. The remote’s message (Figure MAIN MENU quent screens are where the actual macro programmed into one of the four discrete 16), will appear in the LCD display and the Set Button F will remain illuminated in programming take place.
  • Page 51 Programming the Remote Navigation Buttons E Volume Punch-Through red. Press the ⁄¤ P U N C H - T H R O U G H Follow these steps to enable the Volume until appears on the bot- PUNCH-THROUGH T V < - A V R Up/Down and Mute controls from one device to tom line of the LCD screen, as shown in Figure 48.

  • Page 52: Ezset Configuration

    LCD ENABLE appears on the bottom line of the LCD screen, Harman Kardon’s patented EzSet feature makes display. When that display appears, press the Set as shown in Figure 59. Press the Set Button...

  • Page 53: Renaming

    Programming the Remote Renaming 6. To enter the new name, press the Numeric Notes on Renaming Devices: Keys H. The letters above the numbered • To move the cursor to the right or left of the While the names given to the buttons and inputs buttons indicate which letter or symbol will display during the renaming process, press the on the DPR represent recognizable categories of...

  • Page 54: Resetting The Remote

    Programming the Remote lower line of the LCD. When the desired device 8. After you enter the first letter of the new Resetting the Remote name appears, press the Set Button F. device name, there are three options for Depending on the way in which the remote has entering the next character: been programmed, there may be a situation S E L E C T A D E V I C E...
  • Page 55 Programming the Remote Additional Notes on Configuring and • When the batteries approach a level below Operating the Remote: which the remote will not function, the • When the remote is being programmed, it will remote’s LCD screen will display a automatically time-out if no button is pressed warning as shown in Figure LOW BATTERY...

  • Page 56: Troubleshooting Guide

    Power switch 2 is red due to possible short and speaker ends • Amplifier is in protection mode • Contact your local Harman Kardon service center due to internal problems No sound from surround or • Incorrect surround mode •...

  • Page 57: Technical Specifications

    Height measurement includes feet and chassis. All features and specifications are subject to change without notice. Harman Kardon and Power for the Digital Revolution are registered trademarks of Harman International Industries, Incorporated. is a trademark of Harman International Industries, Inc.
  • Page 58 250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com Harman Consumer Group International: 2, route de Tours, 72500 Château-du-Loir, France © 2004 Harman Kardon, Incorporated Part No.: ZKD0701HA00...

Table of Contents