Electrical Information - Electrolux ICON E32AF85PQS Use & Care Manual

4 Safety

Electrical information

WARNING
You must follow these guidelines to
ensure that your appliance's safety
mechanisms are operating correctly.
• The unit must be plugged into its own
dedicated 115 Volt, 60 Hz, AC-only
non-GFCI electric outlet. The power
cord of the appliance is equipped
with a three-prong grounding
plug for your protection against
electrical shock hazards. It must
be plugged directly into a properly
grounded three-prong receptacle.
The receptacle must be installed in
accordance with local codes and
ordinances. Consult a qualified
electrician. Do not use an extension
cord or adapter plug.
• If the power cord is damaged,
it should be replaced by the
manufacturer, service technician, or a
qualified person.
• Never unplug the appliance by pulling
on the power cord. Always grip the
plug firmly and pull straight out from
the receptacle to prevent damaging
the power cord.
• To avoid electrical shock, unplug
the unit before cleaning and before
replacing a light bulb or LED light.
• Performance may be affected
if the voltage varies by 10% or
more. Operating the appliance with
insufficient power can damage the
compressor. Such damage is not
covered under your warranty.
• Do not plug the unit into an outlet
controlled by a wall switch or pull
cord to prevent the appliance from
being turned off accidentally.
IMPORTANT
To disconnect power to the unit, unplug
the unit or switch the breaker that supplies
power to the unit to the off position.
Grounding type wall receptacle
Do not, under
any circumstances,
cut, remove,
or bypass the
grounding prong.
Power cord with
3-prong grounded plug