Using The Console Menu; Using Hyperterminal - Ingrasys iPoMan II-1200 User Manual

Using the Console Menu

The iPoMan II-1200 is provided with a serial port that enables
users to configure and control the system through PC's RS-232
serial (COM) port. Use the serial cable provided to connect the
console port to PC's COM port as described in Connecting the
Console on page 19. This section describes how to use a console
application to control the iPoMan II-1200 and configure its
settings such as its IP address, outlet control parameters, access
control table, and trap receivers table.

Using HyperTerminal

HyperTerminal is a console application in Windows that enables
users to configure or control a device through command line
parameters. Users can configure the iPoMan II-1200 parameters
and its outlets through simple numerical commands from PC
keyboard. Users can also use Telnet or any other console
application for controlling the device in a similar manner.
Follow these steps to start HyperTerminal and communicate
with the iPoMan II-1200
1. To start HyperTerminal, click
Start, Programs, Accessories,
Communications, and
HyperTerminal from the
Windows Start button.
2. A New Connection opens. Type a
name for the connection in the
Name field and select an icon for
the connection. Click OK when
done.
~23~
iPoMan II-1200