Altec IMW120 Quick Start Manual

1. Make sure the following items are
included in your package.
USB Cable
IMW 120
AUX Cable

4. Pairing Your Speaker With a Bluetooth Phone

-Slide the ON/OFF Switch to the ON position. Your speaker
will enter pairing mode and the LED Indicator Lights will alternately
turn blue and red.
-Go to the Bluetooth Manager of your Bluetooth device. Search
Bluetooth devices and select "Solo Motion" to start connecting.
-If required, enter the PIN code "0000" and confirm the
entry. Once paired, you will hear your speaker audibly say: "You are
now paired, enjoy."
Quick Start Guide

2. For a look at the various buttons on your speaker,

view the graphic below.
1
2
3
6 7
4
5
① Play/Pause
② Volume –
③ Volume +
④ Answer
⑤ LED Indicator Lights
⑥ ON/OFF Switch
⑦ Charging Port
⑧ AUX IN port

5. Listening to Music on Your Speaker

Play/Pause
Press the Play/Pause button to get music from your audio source
to play or pause.
Next/Previous Song
Press and hold the Volume + or Volume- buttons for 2s to
advance to the next song or go back to the previous one.
Increase/Decrease Volume
Press and hold the Volume + or Volume - buttons to
increase or decrease the volume.
3. Charging: In order to charge your speaker's internal battery, connect
one end of the included USB cable to the charging port on your speaker.
Connect the other to a USB port or AC charging adapter (not included). An
LED indicator Light turns red when charging, and turns o when fully
charged. Charging may take up to 3 hours.
8

6. Using Your Speaker During Phone Calls

Last Number Redialing
Quickly tap on the Answer button twice and the last number that you
dialed will be redialed.
Answering an Incoming Call
To answer an incoming call, quickly press the Answer button.
Ending a Call
To end a call, quickly press the Answer button, and the call will be
disconnected.
Adjusting Volume
By pressing the Volume Up or Volume Down buttons you can increase or
decrease the volume of the phone call.