Track Smoothing; Trail Options - Lowrance GlobalMap 5200C Operation Instructions Manual

Sounds command, left. At right, the Sounds menu.
Once in the Sounds menu:
To set Key Press Sounds: With the option highlighted, press
check it (turn on) and uncheck it (turn off.) After the option is set, press
| to return to the page display.
EXIT EXIT
To set Alarm Sounds: Press ↓ to
lighted, press
the option is set, press
To set Alarm Volume: Press ↓ to
bar. The left end of the scale is low volume; the right end is high volume.
After the option is set, press
To set Alarm Style: Press ↓ to
change the style, then press
| to return to the page display.
EXIT EXIT

Track Smoothing

This is a factory setting on the GPS Setup menu that should always be
left on. When stopped or traveling at slow speeds (such as walking or
trolling), Track Smoothing prevents wandering of trails, the steering
arrow, compass rose and a map in track-up mode.

Trail Options

There are several options you can use with trails. Some affect all trails;
other options can be applied to a particular trail. You can change the
way trails are updated, display or hide trails, create a new trail, delete
a trail, etc.
General Trail Options
To access the Trails Menu:
1. Press
MENU
to check it (turn on) and uncheck it (turn off.) After
ENT
|
EXIT
| |↓ to
MENU M
A
LARM
to return to the page display.
EXIT
V
OLUME
| to return to the page display.
EXIT EXIT
A
LARM
. After the option is set, press
ENT
| .
T ENT
Y RAILS
99
With the option high-
S .
OUNDS
. Press → or ← to move the
| . Press ↑ or ↓ to
S ENT
TYLE
to
ENT