Specifications - Hitachi HTA-DD3E Service Manual

SPECIFICATIONS

• AUDIO SECTION
(Power amplifier)
Rated output:
SINUS power:
Output terminals:
(Analog)
LINE input
Input sensitivity / input impedance:
Frequency response:
S/N ratio:
Total harmonic distortion:
PHONO input-REC OUT
Input sensitivity / input impedance:
RIAA deviation:
S/N ratio:
Total harmonic distortion:
Rated output / Maximum output:
• VIDEO SECTION
(Composite)
Input/output level and impedance:
Frequency response:
(S-Video)
Input/output level and impedance:
Frequency response:
(Component)
Input/output level and impedance:
Frequency response:
• TUNER SECTION
Receiving range:
Usable sensitivity:
50 dB quieting sensitivity:
S/N ratio:
Total harmonic distortion:
• GENERAL
Power supply:
Power consumption:
Maximum external dimensions:
Weight:
• REMOTE CONTROL UNIT (RB-DD1S)
Batteries:
External dimensions:
Weight:
• Accessory supplied:
* For purposes of improvement, specifications and design are subject to change without notice.
For (E, EBS)
80 W + 80 W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.1 % T.H.D.) 100 W + 100 W (EIAJ, 6 ohms)
Front:
(6 Ω/ohms, 20 Hz ~ 20 kHz with 0.1 % T.H.D.) 100 W (EIAJ, 6 ohms)
Centre: 80 W
80 W + 80 W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.1 % T.H.D.) 100 W + 100 W (EIAJ, 6 ohms)
Surround:
90 W + 90 W (6 Ω/ohms, 1 kHz, 0.1 %)
Front:
(6 Ω/ohms, 1 kHz, 0.1 %)
Centre: 90 W
90 W + 90 W (6 Ω/ohms, 1 kHz, 0.1 %)
Surround:
6 to 16 Ω/ohms
Front: A or B
12 Ω/ohms or more
A + B
6 to 16 Ω/ohms
Center/Surround:
200 mV / 47 kΩ/kohms
10 Hz ~ 50 kHz: +1, –3 dB
93 dB (IHF-A weighted)
0.1% (20 Hz ~ 20 kHz)
2.5 mV / 47 kΩ/kohms
±1 dB (20 Hz ~ 20 kHz)
74 dB (IHF-A weighted, with 5mV input)
0.03% (1 kHz, 3V)
150 mV / 7V
1 Vp-p, 75 Ω/ohms
5 Hz ~ 10 MHz +1, –3 dB
Y=1 Vp-p, C=0.286 Vp-p
5 Hz ~ 10 MHz +1, –3 dB
Y=1 Vp-p, C =0.7 Vp-p, C =0.7 Vp-p
B R
5 Hz ~ 10 MHz +1, –3 dB
[FM] (note: µV at 75Ω/ohms, 0 dBF = 1 ∞ 10
87.50 MHz ~ 108.00 MHz (0.05 MHz step)
2.0 µV (17.2 dBf)
STEREO
MONO
STEREO
MONO
STEREO
AC 230V, 50 Hz (E,EBS), AC 110 ~ 127V/220 ~ 240V, 50/60 Hz (W, WUN,WAU)
180 W (Standby mode = 1.5W)
434 (W) ∞ 144 (H) ∞ 320 (D) mm
8.1 kg
R6P/AA Type (two batteries)
54 (W) ∞ 172 (H) ∞ 27.2 (D) mm
100 g (including batteries)
Operating instructions, Remote control unit (RB-DD1S),
R6P/AA batteries, AM loop antenna and FM indoor antenna
– 3 –
For (W, WUN, WAU)
W) [AM]
-15
522 kHz ~ 1611 kHz (9 kHz step) (E, EBS)
522 kHz ~ 1611kHz (9 kHz step),
520 ~ 1710 kHz (10 kHz step) (W, WUN,WAU)
600 µV
23µV (38.5 dBf)
80 dB (IHF-A weighted)
75 dB (IHF-A weighted)
0.2% (1kHz)
0.4% (1kHz)
HTA-DD3