Panasonic KX-NT543 Quick Reference Manual page 16

Before Operating the Telephone
LCD Backlight
While on-hook
1. Press the
PROG
2. Enter
3. Press [ENTER].
4. Press a dial key to select the LCD backlight mode.
: Automatic
: Always ON
: Always OFF
5. Press [ENTER].
6. Press [CANCEL].
Registering the Bluetooth headset (KX-NT560 only)
1. Set the Bluetooth headset to pairing mode by following the
instructions provided with the headset.
2. Press the
PROG
3. Enter
4. Press [ENTER].
5. Enter the Pass Key and press [ENTER].
6. Press [CANCEL].
Confirming the ID of the Bluetooth headset and deregistering the
Bluetooth headset (KX-NT560 only)
1. Press the
PROG
2. Enter
3. Press [ENTER].
4. Press [ENTER] to deregister the headset.
5. Press [CANCEL].
*1 For more information regarding the Pass Key of your headset, refer
to the operating instructions of your headset.
*2 Confirm that the displayed ID is the ID of your headset. For more
information regarding the ID of your headset, refer to the operating
instructions of your headset.
*3 If you do not wish to perform deregistration, press [CANCEL] 3 times.
16
soft button (S1).
.
soft button (S1).
.
soft button (S1).
.
*2*3
*1