Gear Change Pedal Adjustment - Ducati 999 Owner's Manual

Gear change pedal adjustment (fig. 26)
Gear change pedal position relative to the footpeg may
be adjusted to suit rider preferences.
There are three different adjustments available:
Approximate adjustment of pedal position
2
Fit a wrench into the socket (1) to lock out removable
linkage rotation and slacken the locknut (3). Release and
remove the screw (2) and adjust the linkage axially so as
to set the gear change pedal in the desired position. The
E
linkage has four positions determined by the axis of the
screw (2). When finished, tighten the screw (2) and the
1 3
locknut (3).
fig. 26
Fine adjustment
Fit a wrench into the socket (1) to lock out removable
linkage rotation and slacken the locknut (3). Rotate the
linkage working the socket (1) so as to set pedal in the
desired position. When finished, tighten the locknut (3).
Combined adjustment
Both adjustment techniques may be used together. Make
sure to tighten locknut (3) and screw (2) when finished.
32