Samsung 8000 Quick Start Manual

Attach the TV to Connect video
the Stand devices
Step Step
1
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Step 1 Attach the TV to the Stand
1
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
3
L
R
x4 (M4 X L12)
5
7
x4 (M4 X L12)

QUICK START

GUIDE
BN68-05493A-00
Insert the Power on and
batteries into the start the initial
remote control setup
Step Step
2 3
Open the package, and remove the top piece of
packing material, leaving the screen in the box.
Fit the base and legs together, making sure that
the legs are correctly aligned with the base.
Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
Insert 4 screws and secure the stand to the TV.
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
Included with your TV
Remote Control
Smart Touch Control Power inlet cover
4
Batteries (AAA x 4) Wall mount adapter
RCA Adapter x 2
Remote Control
Also included: User manual, 3D Active Glasses
2
4
6
8
Stand Parts and Cables
Cable clip
x 2
IR extender
Component adapter
x 8
x 2
Leg Screws
Assemble the stand first, before removing the TV
from the box. You will need the base, legs and
screws.
Accessories may be
x 2
x 8
located at different
positions, depending on
Base Leg Screws
the model.
Insert 2 screws through the base into each leg as
shown, and then secure the legs to the base with
a screwdriver.
Holding the stand parallel to the screen, slide the
stand legs into the notches on the back of the TV.
When placing the product on a console or shelf,
make sure that the stand does not protrude
beyond the edge of the console or shelf. This
may cause the product to fall off and result in a
malfunction or injury.
Safety strap
Power cord
Base