Note; Caution; Fn + F5; Key Combinations - Panasonic CF-71 Series Reference Manual

Key Combinations

CAUTION

Do not press the following key combinations repeatedly in (quick) succession.
Do not press the following key combinations while using the touch pad (mouse) or other keys.
Key Functions
LCD brightness control
Fn + F2
Display change
Fn + F3
Fn + F4 Speakers on/off switch
Volume control

Fn + F5

( down)
Volume control ( up)
Fn + F6
Holding down on the keys
changes the sound level.
*
Power off using the
Fn + F7
suspend function
Power management
Fn + F8
enable/disable switch
Fn + F9 Remaining capacity of
the battery pack
*
ECO mode for conserv-
Fn + F10
ing power
*
When [Disable] is set for [Fn+F7/Fn+F10] with the Setup Utility, these key combinations become inoperable.
Hold down the Fn key and press F2 to change
the brightness.
By pressing this key combination, you can select ei-
ther an external display, LCD or simultaneous, even
if an external display is not connected. Powering the
computer off and then back on enables the display
setting of the Setup Utility.
Pressing this key combination turns off audio from
the internal speakers and headphone jack. Pressing
it again, or powering the computer off and then back
on enables the speaker setting of the Setup Utility.
CAUTION
When disabling the speakers with this key com-
bination, the warning beep is also disabled.
Pressing this key combination adjusts the volume of
the internal speakers and headphone jack.

NOTE

This key combination cannot be used to adjust
the volume of the warning beep.
A dull elongated sound may be heard while
adjusting the volume.
Pressing this key combination causes the current
screen on the display to be saved to memory, and
powers off the computer. When the computer is pow-
ered on again by sliding the power switch or press-
ing the sleep switch, this save screen will be displayed.
(The computer must be plugged into the AC adapter
or have a battery pack with sufficient remaining power
installed.)
Pressing this key combination temporarily disables
the power management feature of the Setup Utility.
Pressing it again, or powering the computer off and
then back on enables the power management set-
ting of the Setup Utility.
Pressing this key combination displays the remain-
ing battery capacity on the screen.
Pressing this key combination cuts off power to the
LCD and turns off the hard disk motor until operation
is resumed by pressing any key.
Popup Window
page 16
page 17
2
When the bright-
ness is at its maxi-
mum value.
OFF
ON
Down
Up
Enable
Disable
Remaining
capacity (%)
display
Battery pack is
not installed.