Sony STR-DA5800ES Operating Instructions Manual page 134

• Make sure you have connected both the L
and R jacks to a monaural device, analog
device requires both L and R jack
connections. Use a monaural-stereo cable
(not supplied). However, there will be no
sound from the center speaker when a
sound field (Pro Logic, etc.) is selected.
Center/surround/surround back/front
high speaker(s)
• Check that the speaker settings are
appropriate for the setup using "Auto
Calibration" or "Speaker Connection" in
the Speaker Settings menu. And then
check that sound is output from each
speaker correctly, using "Test Tone" in the
Speaker Settings menu.
• Select the "HD-D.C.S." sound field
(page 63).
• Adjust the speaker level (page 104).
• Make sure the center/surround/front high
speaker(s) is (are) set to either "Small" or
"Large."
Surround back
• Some discs have no Dolby Digital
Surround EX information.
• If the speaker pattern is set so that there are
no surround back speakers, the input
signals to the SUR BACK jacks are
invalid, because the receiver cannot down-
mix the surround back channels.
Subwoofer
• Check that the subwoofer is connected
correctly and securely.
• Make sure you have turned on your
subwoofer.
There is no sound from a specific
device.
• Check that the device is connected
correctly to the audio input jacks for that
device.
• Check that the cord(s) used for the
connection is (are) fully inserted into the
jacks on both the receiver and the device.
• Set the INPUT MODE to "AUTO"
(page 88).
134
US
HDMI input
• When "2ch Analog Direct" is being used,
the sound is not output. Use other sound
field (page 62).
• Check the HDMI connection (page 31, 33,
34, 36).
• Check that you use an HDMI cable that
have an HDMI logo authorized by HDMI
Licensing LLC.
• Depending on the playback equipment,
equipment may need to be set up. Refer to
the operating instructions supplied with
the equipment.
• Be sure to use a connecting cable for the
HDMI jack corresponding to High Speed
HDMI cable when you view images or
listen to sound during a 1080p, Deep
Color, or 3D or 4K transmissions.
• Sound may not be output from the receiver
while the GUI appears on the TV screen.
Press HOME to turn the GUI off.
• Audio signals (format, sampling
frequency, bit length, etc.) transmitted
from an HDMI jack may be suppressed by
the connected equipment. Check the setup
of the connected equipment if an image is
poor or the sound does not come out of a
device connected via the HDMI cable.
• When the connected equipment is not
compatible with copyright protection
technology (HDCP), the image and/or the
sound from the HDMI OUT jack may be
distorted or may not be output. In this case,
check the specification of the connected
equipment.
• Set the image resolution of the player to
more than 720p/1080i to enjoy High
Bitrate Audio (DTS-HD Master Audio,
Dolby TrueHD).
• The image resolution of player may need
certain settings be made before you can
enjoy DSD and multi-channel Linear
PCM. Refer to the operating instructions
of the player.
• Make sure the TV is compatible with the
System Audio Control function.