Edit Co Code; Dialing From Phonebook - Telkom OPTICON MICRO Installation & Operation Manual

OptiCon Micro
Installation and Operation Manual
GDC-400H/450H
1. Press the Option (
2. Use the [Navigation] (
button.

3.26.1 Edit CO Code

Description
When dialing an outside call, the user must either access an outside line or dial a CO Line access code.
When placing a call from the Phonebook, the code may be dialed manually or the phone may be
configured to insert automatically a CO Line access code in front of the number. In the latter case, the
code must be configured in the Phone Settings under the Edit CO Code menu. Also, the number must be
configured to enable the "CO Access Code" when adding the number to the Phonebook, refer to section
3.26.3
Operation
To assign a CO Code:
LWS-WK
1. Press the [Menu] soft button.
2. Select Phone Settings
3. Select Edit CO Code.
4. Press the [Edit] soft button.
5. Use the dial pad to enter a Line access code (ex. „9‟).
6. Press the [OK] soft button.
GDC-400H/450H
1. Press [Menu] (
2. Select Phone Settings.
3. Select {Edit CO Code}.
4. Press the [Edit] (
5. Use the dial pad to enter a Line access code (ex.‟9‟).
6. Press the [OK] (

3.26.2 Dialing from Phonebook

Description
Records in the Phonebook can be searched and a number can be dialed.
) left soft button; this displays the Options menu.
) button to highlight Phonebook and press the OK (
) left soft button.
) left soft button (CODE-1 only).
) left soft button.
62
) left soft