Optional Lenses - Martin CX-10 Extreme User Manual

Optional lenses

The standard 22 degree lens can be changed to 14 or 32 degrees using two separately orderable lens kits.
See Accessories on page 41 for part numbers.
C H A N G I N G T H E L E N S
1 Disconnect the fixture from AC power and allow it to cool.
2 Remove the fixture cover.
3 Using a Phillips screwdriver, remove the focus module.
4 Using a Phillips screwdriver, remove the two screws from the focus module that hold the lens assembly in
place.
5 Slide the lens assembly out of the focus module.
6 Slide the replacement lens assembly in to the focus module and secure it using the two Phillips screws.
7 If you are installing the narrow-angle lens kit (14° beam angle) then you need to change the glass. Remove
the dimmer module so that you can access the front glass module. Remove the front glass module and
Optical configuration 19