Use Mac OS to change the display mode
By default, the docking station is set up as an extended display.
• Do one of the following:
• To change the display to Mirror mode, on the Arrangement screen on a
display, select the Mirror Display check box.
• To change the display to Extend mode, on the Arrangement screen on a
display, clear the Mirror Display check box.
Supported video resolutions
See the video resolution chart below for specific configurations and supported
resolutions:
Note: Depending on the configuration and the supported resolutions of your
connected monitor, the docking station may support video resolutions lower than
specified above.
Instruction Manual
Video Output
HDMI - Single
Display
Max HDMI Resolution
2560x1440
6
Need help?
Do you have a question about the USB3VDOCKH and is the answer not in the manual?