Electrolux EASE09P5AHLW Instruction Manual page 23

43 electrolux how the air conditioner works
COMBINED TIMER (Setting both ON and
OFF timers simultaneously)
TIMER OFF → TIMER ON
(On → Stop → Start operation)
This feature is useful when you want to
stop the air conditioner after you go to bed,
and start it again in the morning when you
wake up or when you return home.
Example:
To stop the air conditioner 2 hours after
setting and start it again 10 hours after
setting.
1. Press the TIMER OFF button.
2. Press the TIMER OFF button again to
display 2.0h on the TIMER OFF display.
3. Press the TIMER ON button.
4. Press the TIMER ON button again to
display 10h on the TIMER ON display .
5. Wait for 3 seconds and the digital display
area will show the temperature again.
The "TIMER ON OFF" indicator remains
on and this function is activated.
TIMER ON → TIMER OFF
(Off → Start → Stop operation)
This feature is useful when you want to
start the air conditioner before you wake up
and stop it after you leave the house.
Example:
To start the air conditioner 2 hours after
setting, and stop it 5 hours after setting.
1. Press the TIMER ON button.
2. Press the TIMER ON button again to
display 2.0h on the TIMER ON display.
3. Press the TIMER OFF button.
4. Press the TIMER OFF button again to
display 5.0h on the TIMER OFF display .
5. Wait for 3 seconds and the digital display
area will show the temperature again.
The "TIMER ON OFF" indicator remains
on and this function
TIMER ON OFF
Start
Stop
On
Set
2 hours later
10 hours later
after setting
after setting
TIMER ON OFF
Start
Stop
Off
Set
2 hours later
5 hours later
after setting
after setting
The timer setting (TIMER ON or
TIMER OFF) that in sequence
occurs directly after the set time
will be activated first.
Sleep/Fresh functions
Press this button less than 2nds will
initiate SLEEP function. And if keep
pressing this button more than
2nds,the FRESH function is initiated.
The sleep function enables the unit to
automatically increase(cooling) or
decrease(heating) 1°C per hour for the
first two hours, then hold steady for the
next 5 hours, after that the unit will
stop operation. It can maintain the
most comfortable temperature and
save energy.
The SLEEP function is only available
under Cooling, Heating and AUTO
operations.
When the FRESH function is initiated,
the Ionizer/Plasma Dust Collector
(depending on models) is energized
and will help to remove pollen and
impurities from the air.
Special functions
Refrigerant Leakage Detection
With this new technology, the dipsplay
area will appear EC and the indication
lamps continue flashing when the
outdoor unit detects refrigerant
leakage.
Louver Angle Memory Function
(optional):
Within the scope of safety angle, it will
memorize the open angle of horizontal
louver. If it exceeds, it will memorize
the boundry of safety angle. In the
following circumstances, it will return
to standard angle:
how the air conditioner works electrolux 44
1. pressing the turbo or manual control
button
2. unplug and then plug in the
machine.
So we strongly suggest that the open
angle of the horizontal louver should
not be set too small, in case the
condensed water forms and drops
from the
horizontal louver.
Self-clean function (optional) -
Function used after the shut down of
cooling operation to clean the
Evaporator ,it keeps the air fresh for
the next operation.
For cooling models, the unit will
operate under FAN ONLY mode
at LOW fan speed for half an hour, and
then turn off automatically.
For cooling & heating models, the unit
will operate as in the below sequence :
FAN ONLY mode at Low fan speed--
Heating operation with LOW fan speed
---FAN ONLY operation--Stop
Operation---Turn off.
This function is only available under
COOL(AUTO COOL, FORCED COOL)
and DRY mode.
Before selecting the function, it is
recommended to run the air
conditioner under cooling operation for
about half an hour. Once the Self Clean
function is activated, all TIMER setting
will be cancelled.
During SELF CLEAN operation, when
pressing the SELF CLEAN button on
the remote controller again,the unit will
stop the operation and turn off the unit
automatically.