Declaration Of Conformity - HP 4120 Quick Start Manual

Declaration of Conformity

Supplier's Name:
Manufacturer's Address:
declares, that the product
Product Name:
Product Number(s):
Regulatory Model No: RSVLC-1102
Product Options:
conforms to the following Product Specifications:
IEC 60950-1:2005 / EN 60950-1:2006 +A11:2009
Safety:
EN 62479:2010
EMC: EN 55022:2006 +A1:2007, Class B
EN 55024:1998 +A1:2001 +A2:2003
FCC 47 CFR 68.316, Hearing Aid Compatibility for products with handsets
Telecom:
Energy Use: Regulation (EC) No. 1275/2008
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC and
the EMC Directive 2004/108/EC and carries the CE marking accordingly.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: 1) This device may not cause harmful interference, and 2) this device must accept any
interference received, including interference that may cause undesired operation.
For regulatory identification purposes, this product has been assigned a Regulatory Model Number
(RMN). The RMN is the main product identifier listed in the regulatory documentation and test reports
for this product. The RMN should not be confused with the marketing name or product number.
Roseville, September 7, 2011
Local contact for regulatory information:
EU: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Straße 140, D-71034 Böblingen, Germany
www.hp.eu/certificates
U.S.: Hewlett-Packard, 3000 Hanover St., Palo Alto, CA 94304, U.S.A. 650-857-1501
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
Hewlett-Packard Company
8000 Foothills Blvd., Roseville, CA 95747 U.S.A.
HP 4120 IP Phone
J9766A
J9767A
HP 4120 Quick Start Guide
Michael E. Avery, Regulatory Engineering Mgr
HP Networking
DoC #: RSVLC-1102-01
E
N
G
L
I
S
H
23