Delay Start Cooking (Programme Set In Advance) - Kenwood K20MSS10 Instruction Manual

delay start cooking (programme set in advance)

For delay start cooking, follow the steps below.
For instance: The current time is 12 o'clock (noon) and you want to cook with 80% microwave
power for 5 minutes at 1:30 o'clock in the afternoon.
You can set a maximum of 2 stages for delay start cooking. Defrosting cannot be set as one
of those stages. Ensure the door is closed prior to setting the programme.
1. Press the microwave button once and the
LED display will show "P100". Press the
microwave button repeatedly until the LED
display show "P80".
Alternatively, after you press the
microwave button once, you can turn the
timer/weight/auto menu dial to change
the power level.
2. Press the start/+30sec/confirm button to
confirm the microwave power level. Turn
the timer/weight/auto menu dial to adjust
the cooking time until the LED display
shows "5:00".
Do not press the start/+30sec/confirm
button at this stage.
3. Press the clock/pre-set button to preset
the starting time for the cooking. The hour
digits will flash first. Turn the timer/weight/
auto menu dial to adjust the starting time
until the LED display shows "13:00".
4. Press the clock/pre-set button to preset
the starting time for the cooking. The
minute digits will flash first. Turn the timer/
weight/auto menu dial to adjust the
starting time until the LED display shows
"13:30".
5. Press the start/+30sec/confirm button
to complete the setting. The microwave
will sound when the count down reaches
the starting time and cooking will start
automatically.
6. Press the stop/clear button once to stop
the cooking. Press the stop/clear button
again to cancel the setting.
To find out the preset time, press the
clock/pre-set button once while the
microwave is still in the preset state. It will
last for 2-3 seconds and then return to its
original display.
1
3, 4
6
2, 5
2, 3, 4
21