Advertisement
a)
Adjust L3 on max S-meter reading.
b)
Adjust L9 on max S-meter reading.
2)
This
~ompletes
the adjustment of the 2 optjons.
3)
Milllnt the top cover.
Instead of adjusting the receiver as explained
in l) you may choose a weIl known station with
Info.
stable "S" readings and adjust for max S-meter
adjustment
reading.
With each option N02 we supply the mounting hard
Info.
ware. The Option N02 may be installed using the
drilling
screwholes on the main-board.(right side)
Info.
In case you want to save the components that have
removal
to be removed we advise you to unsolder them.
General comment:
The installation of the Option N02 requires no
technical radio skills. However, we believe the
installer should have same basic saldering
skill~.
Advertisement
