Power Up And Bind A Remote Access Gateway (Rfg100) - Honeywell evohome Installation Manual

18
Remote Access Gateway (RFG100)
!
If the Gateway was in
the Connected Pack
with evohome, it is
already bound and
there is no need to
follow these binding
instructions.
evohome
Controller
If you are NOT
following GUIDED
CONFIGURATION
follow these steps
on your evohome
Controller display first:
1. Press and hold
"Settings" for 3
seconds
2. Press the green tick
3. Select ADD
GATEWAY
Step 3: Power up and bind devices
Power up and bind a Remote Access
Gateway (RFG100)
Connect the Gateway to the power
supply and turn on the power.
To bind the Remote Access Gateway (RFG100)
Press and hold the button on the base of the gateway
1
unit until you see a flashing light next to the
On the evohome Controller press
2
the green bind button
You should receive a SUCCESS message on the
3
evohome Controller (if not go back and re-bind)
Now you need to set up a user account
and download the smartphone app.
Go to www.mytotalconnectcomfort.com and follow the
instructions there.
1