Menu
Phone Settings
Network Config
Setting the LEAP Username and
Password
When powering on your phone for the first time, you
might need to set your LEAP user name and password.
Your administrator can provide LEAP information.
You must access the Network Configuration menu
and navigate to the 802.11b Configuration options.
Use the following steps to set your username and
password.
Setting the Username or Password
1. Press Menu, then press
Network Config menu, and press Select.
2. Scroll to 802.11b Configuration and press Select.
3. Scroll to LEAP and press Select.
24
Section in Phone Guide
"Customizing Phone Settings
and Viewing Phone Status"
section on page 59.
"Setting the LEAP Username
and Password" section on
page 24.
Your system administrator can
provide you with information
about network configuration
settings.
or
until you see the
78-14564-03