Panasonic Lumix DMC-TZ57 Operating Instructions Manual page 180

The ends of the pictures are cut at printing.
•
When using a printer with a Cropping or borderless printing function, cancel this function before
printing.
(For details, refer to the operating instructions for the printer.)
•
When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can be
printed.
The panorama picture is not printing correctly.
•
Since aspect ratio of a panorama picture differs from normal pictures, it may not always be possible
to print it correctly.
> Please use a printer that supports panorama pictures.
(For details, refer to the operating instructions for the printer.)
Others
An unreadable language was selected by mistake.
•
Press [MENU/SET], select the [Setup] menu icon [
Then press [MENU/SET], and then select the [~] icon to set the desired language.
A red lamp sometimes turns on when the shutter button is pressed halfway.
•
In dark places, the AF Assist Lamp lights red to make it easier to focus on a subject.
The AF Assist Lamp does not turn on.
•
Is [AF Assist Lamp] on the [Rec] menu set to [ON]?
•
The AF Assist Lamp does not turn on in bright places.
The camera becomes warm.
•
The surface of the camera may become warm during use. This does not affect the performance or
quality of the camera.
The lens clicks.
•
When the brightness changes due to zoom or camera movement, etc., the lens may click and the
picture on the screen may drastically change. However, the picture is not affected. The sound is
caused by the automatic adjustment of the aperture. This is not a malfunction.
The clock is reset.
•
If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please reset the clock.
Others
].
(P102)
- 180 -
(P50)
(P22)